NOMA 052-4744-2 Instruction Manual page 9

ASSEMBLY
8. Attach light kit
· Attach the light kit by bringing up the
switch housing cap to the fan switch
housing.
· Then tightly secure the screws that were previously
removed from the switch housing cap (see Fig. 16).
9. Attach glass shade
· Unscrew the glass screw from light kit. Place neck
of glass into light housing cup. Use the star-head
screwdriver to carefully tighten the glass screws.
If too much force is used, the glass shade may
break (see Fig. 17).
· Install E12 X 60 W TYPE B bulbs (not included)
(see Fig. 18).
Note:
The dimmer function can not be used
if CFL bulb is used.
16
Switch housing
Light kit
Screw
17
Glass
18
7
Screw