Battery And Fuse Replacement - MasterCraft 052-0060-2 Instruction Manual

BATTERY AND FUSE REPLACEMENT

When the symbol "
battery is low and must be replaced immediately.
To replace battery, remove the screw on the battery cover and
remove the battery cover. Replace the exhausted battery with a new
one of the same type. Reinstall the battery cover and the screw.
Fuse rarely needs to be replaced and is blown almost always as a
result of operator's error. To replace fuse, remove the screws on the
back cover and move the back cover aside gently. Replace the blown
fuse with a new one of the same ratings. Reinstall the back cover and
the screws.
This meter uses two fuses:
F 1:
250 mA/300 V FAST fuse, Ø5×20mm
F 2:
10 A/300 V FAST fuse, Ø5×20mm
ACCESSORIES
Manual: 1 piece
Test Lead: 1 pair
" appears on the display, it means that the
18