Table of Contents
Advertisement
3. Measurement Mode
S-TIME (S):
DATA (N):
MEMORY:
PRINT:
3. MEMORY
4. PRINT
5. SET OK!
(a)
<AVE>
T: 00/10
N: 000/010 P:007
16.8 m/s
127 ℃
<AVE>
T: 01/10
N: 001/060 P:007
16.8 m/s
127 ℃
<AVE>
T: 10/10
N: 060/060 P:007
12.8 m/s
126 ℃
<AVE RESULT>
AVE:
12.8 m/s
MAX:
15.8 m/s
MIN : 10.8 m/s
AVE:
126 ℃
MAX:
129 ℃
MIN :
123 ℃
1.800.561.8187
[Measurement Condition]
Set the length of sampling (instantaneous value) time.
Configurable sampling time (sec): 1 ~ 6, 10, 12, 15, 20, 30, 40, 50, 60 sec
Set how many data to be taken every configured sampling time.
Configurable number of data: 1 ~ 6, 10, 12, 15, 20, 30, 40, 50, 60, 100, 120, 150, 180
When YES, data will be stored in the internal memory.
For details on memory capacity, refer to P22.
When YES, the calculation result will be output to the printer automatically.
When NO, you can still print out the hardcopy of the calculation result by pressing PRINT key
after the calculation result is displayed.
Refer to P24 for printout samples.
△, ▽
NO
SET
NO
ready
M:015
START/STOP
M:015
[Start
Measuring]
[Stop
Measuring]
M:016
[Calculation
Result]
Printing
Example
P24
www.
(7) After measurement condition is set, select 5. SET OK!.
Then press SET key.
(8)
ready
will be displayed indicating that the instrument is ready
to start a measurement.
Press START/STOP key to start sampling.
☆To go back to the previous screen (measurement condition
setting screen) press △ key.
☆To stop measuring halfway through: START/STOP or ▽ key.
- The data collected until the measurement is halted will be
calculated.
☆To cancel measuring (a): Press △ key.
- It will go back to screen (a) where the instrument is ready to
start a measurement.
☆To cancel a measurement (b): Press MENU key.
- It will go back to the menu screen.
T:01/10···S-TIME(S)
setting value (sec)
will be increased every second
M:015--- used memory (shown in %. When it shows 100 (%),
there is no memory left.)
N:001/060···DATA (N)
setting value
will be increased every time data is collected.
P:007--- the page number where the data is stored
If 3.MEMORY NO is selected, it will not be displayed.
☆ PRINT:
☆ START/STOP or ▽: ready for measuring (a)
☆ MENU:
.com
hardcopy of the display screen
menu will be displayed.
information@itm.com
15
P22
Advertisement
Table of Contents
