Panel - Coxo C-SMART-1 Pro User Manual

C-SMART-l Pro
8.1.3 LCD Panel
,----------------
1 SYSTEM:
I
Wave 0
I
l
FlU:
liJ ID IDCKJ
I @J@J
:
Fig.14 LCD Panel
A Working area
Displays operating parameters in different modes.
The device can be operated in three different modes:
M1: Apex locator only,
B
Mode area
M2: Motor only,
M3: (Dualmode) Motor with apex location function.
c Display motor rotation direction, auto reverse,
Motor option
lighting and LED delay time.
area
*M2 and M3 are available
BATTERYdisplays the present remaining amount of
the battery :
-
CJJ
E:!]
[ !!] Less than 30% remains.
r::::7'
NOTE:
The remaining amount of battery mark indicates
a voltage . When a load is applied to the motor
Status area
D
handpiece, there remaining amount of battery
mark appear to be come lower.
SOUND VOLUME displays the current sound volume
(see chapter 6.5.7. Sound Volume Adjustment).
4 marks can be displayed:
OJ
High volume
rm
Low volume
Minimum volume
1:1
Limited off
Uaar Manual
----------------
CI!Mwo
SPEED:
150 ..
m
TORQUE
0.6
N<m
••••• II
Full charge
Approximately 30-80% remains.
Battery is drained or very low battery voltage.
Charge the battery.
C-SMART-lPro
8.3.3.5 Changing Speed, Torque and set Changing Speed and Torque
• See 8.3.2.5 Changing Speed and Torque
Set the DR'S CHOICE apex position
Follow these steps to set the DR'S CHOICE apex position:
• Press the SET key, the apex setting icon becomes adjustable state,(Fig.28)
·Press the Up or Down key to adjust the apex position.
Path File
l:loaru-
SYSTEM:
Fn.E:
·Cillmm
mCill
Fig.28 Set Apex Position
8.3.3.6 Auto Reverse
See 2.3.2.6 Auto Reverse
8.3.3.7 LED lighting function
See 2.3.2.7 LED lighting function
8.3.3.8 Working
Start and stop the Motor handpiece
The motor is started and stopped with the ON/OFF key on the handpiece.
fyou press the ON/OFF key briefly, the motor handpiece starts. If you re-press
the key, it stops.
Reverse
Press the on off button for more than 2 seconds to change the direction of file
I
rotation (whether the motor is stopped or running).
The current direction of file rotation is displayed in the motor option area.
Means forward rotation
Means reverse rotation
r::::7'
NOTE
Only continuous rotary file systems can change the direction;
reciprocating file systems can not change the direction.
Uoar Manual
·-
0
•pm
SPEED!
15
0.6
••m
•••••
I l -