Page 2
介绍 介绍 Safety caution Standard configuration Main unit CAUTION: Contra angle Please read the following information completely Motor handle before use this product. Silicon coat File holder 1.This unit must be used as the user's guide mentions, not for other Adaptor purpose.
Structure and theory — motor handle Intended use The unit is the supplementary root-canal treatment device, which Contra angle can assist the dentists to operate more standard root-canal in the Start button process of root-canal treatment. Motor handle Construction and installation This product is consist of main unit, foot switch, test wire, handle, file holder, lip hook, handle base and so on.
1. Put the instrument on a solid place. 2. Connect the plug of the motor wire to the main unit, make sure that they are in the right position. 3. Connect the contra angle to the motor. 4. Put the well connected main unit on the handle holder reposefully. AUTO1 5.
Page 5
Mode definition The unit has 4 modes and consists of 6 function options. 1. The plug of the testing wire should be Working mode table completely plugged into hole on the main unit. When you need to pull out the test Automatic1 wire, please don’t pull the wire but hold its pin and pull it out.
Page 6
4. Deciding the working length of root canal when the figure on the LCD screen shows 0.5mm, then measure the distance from the bottom of 踩 按 rubber vernier caliper to the tip of the file. Take note of this figure. AUTO1 So subtract 0.5-1.0mm from the above data is the working length of root-canal.
Page 7
In M3 Mode, you can assemble the unit as follow: In M4 Mode, you can assemble the unit as follow: M3: Reciprocating rotation function, hold down the foot switch or press With the function of root canal measuring root canal expanded, after the handle, the file starts to reciprocating rotation, rotating situation the root canal file into the root canal, the file started forward.
Charge Troubleshooting If the equipment is not normal work, before call our after-sales center, please check the table below. LCD displays the current battery power, the number of lattice shows more, and the power is fuller. If there is no electricity, the lattice will flicker, which means the battery power is about to run out, at this status the beeper will ring per 3S, and the unit will shut down after 60S.
Guarantee The main unit are guaranteed for 24 months from the date of purchase. The accessories (contra angle, motor handle, file holder, adaptor, foot switch, test wire and lip hook line )are guaranteed for 6 months. The guarantee is valid for normal usage conditions. Any modification or accidental damage will render the guarantee void.
Page 10
Symbols and definition This way up Fragile,handle with care Keep away from rain Please refer to the instructions...
Need help?
Do you have a question about the C-SMART-I+ and is the answer not in the manual?
Questions and answers