Setting The Racktimer - HOUNO Visual Cooking CPE & KPE User Manual

USING THE SMARTTOUCH® DISPLAy

Setting the RackTimer

The RackTimer function enables you to set one or two timers for each individual rack.
This way you can cook different products on the same rack or on different racks in
the same cooking mode. RackTimer can be used in the following cooking modes:
Hot Air, CombiSmart, ClimaOptima, Cook & Regen and Steaming.
1. In each mode, touch the Timer display, and then touch the RackTimer button.
2. In the Rack setup list, drag you finger up or down to select the number of racks
you want to associate with the timer. you can choose between 1-10 racks.
3. In the Timers per rack list drag you finger up or down to select one or two timers
per rack.
4. Push the arrow button
5. Touch the desired rack, drag you finger up and down the
Each rack is set to 05:00 as default. Each rack will remember the previously set
time
6.
A running timer will be blue.
7. For the final minute of the timer it will turn yellow.
8. An alarm will sound when the timer reaches 00:00 and will then flash green.
9. If the timer is not stopped after one minute of the alarm sounding it will then
start to flash red.
10. To cancel or reset a timer, touch the timer then touch finish or set a new time.
10 TOUCH USER MANUAL
in the upper right corner to continue.
min
and sec wheels.