Grizzly G0694 Owner's Manual page 48

28. Slide the mounting hub onto the adapter (see
Figure 69), making sure the shoulder of the
hub faces the headstock, then tighten the
inner set screws on the hub.
Shoulder
Adapter
Figure 69. Threading on mounting hub.
-46-
29. Thread the handwheel onto the mounting
hub, then tighten the outer set screws on the
mounting hub (see Figure 70).
Figure 70. Securing handwheel.
30. Re-install the belt on the appropriate motor
pulley groove.
31. Properly re-tension the belt (refer to
Tensioning Belt on Page 41 for detailed
instructions).
Model G0694 (Mfd. Since 03/15)