Notes on incorporating a camera
When incorporating a camera on a device that turns
ON/OFF 3 times or more a day on average, please
confirm the temperature in the set using
communication command 'CAM_TempInq' (VISCA)
or 'CAM_Temperature' (PTP).
Please release heat until the increased temperature
inside the set at the moment the set turns on reduces
until it is stable at 12 °C or below.
Phenomena Specific to Lenses
Ghosting
If a strong light source (e.g., the sun) exists near the
incidence angle of the lens, bright spots may appear in
the image due to diffuse reflection within the lens.
About the trademark
• "Exmor R" and "StableZoom" are trademarks of Sony
Corporation.
• The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States and
other countries.