Initial Settings, Custom Preset and Backup
Initial Settings for the various functions of the FCB
camera are indicated in the "Initial Settings" column.
The "Custom Preset" column indicates whether the
custom preset function can be used to store the
settings. The function enables the stored settings to be
recalled automatically when the camera is turned on.
The "Back up at standby" column indicates whether the
data is preserved even when the camera is in the
standby mode.
Mode/Position setting
Zoom Position
D-Zoom On/Off
D-Zoom Separate/Combine
D-Zoom Position
Focus Position
Focus Auto/Manual
Near Limit Setting
AF Sensitivity
AF Mode
AF Run Time
AF Interval
WB Mode
WB Data (Rgain, Bgain)
One Push WB Data
AE Mode
AE Response
Shutter Position
Maximum Shutter Limit
Minimum Shutter Limit
Color Enhancement On/Off
Slow Shutter Limit
Iris Position
Gain Position
Bright Position
Exposure Compensation On/Off
Exposure Compensation Amount
BackLight On/Off
A circle "" in this column signifies that the data is preserved.
A cross "" signifies that the data IS NOT preserved.
Initial Settings
wide end
Off
Combine
00h
—
Auto
B000 (35 cm)
Normal
Normal
5 sec
5 sec
Auto
—
—
Full Auto
01h
—
1Dh: 1/2000 (59.94 fps)
1Dh: 1/2000 (50 fps)
1Dh: 1/30 (29.97 fps)
1Dh: 1/25 (25 fps)
1Eh: 1/48 (23.98 fps)
12h: 1/60 (59.94 fps)
12h: 1/50 (50 fps)
10h: 1/30 (29.97 fps)
10h: 1/25 (25 fps)
12h: 1/48 (23.98 fps)
Off
0Dh: 1/10 (59.94 fps)
0Dh: 1/10 (29.97 fps)
0Dh: 1/12(50 fps)
0Dh: 1/12(25 fps)
0Dh: 1/12 (23.98 fps)
19h: F2.0
01h: 0dB
—
Off
±0
Off
Custom
Back up
Preset
at standby