7.3
MASTER
CONTROL CARDS
7.3.1
JOB CARD
7.3.2
SCHEDULE CARD
7-6
MASTER control cards contain a $ punch in column one, followed by the
statement name and parameters, separated by commas. Only cards required
for a compile-only and a compile-and-execute run are described in this manual.
A complete discussion of the options available under MASTER is found in the
MASTER Reference Manual, Publication number 60213600. The UCBL card is
a MASTER control card.
All jobs submitted for processing under MASTER require a JOB card. It sup-
plies information to the installation accounting routine, identifies the program-
mer, and sets a job processing time limit.
( $JOB,e
,i,
t,le
,pc
c
Account number, 0 -8 characters
Programmer identification, 0-8 characters
t
Job time limit in minutes for entire job maximum 1440 minutes;
if blank, job time depends on the installation accounting routine
lc
line count, specifies size of standard output file
pc
punch count, specifies size of standard punch file
The c and i fields are mandatory. If one of the fields is blank, the job is
terminated. The JOB card is written on OUT.
($SCHED, SCR=x, CORE=x, •••
Under MASTER $SCHED cards are optional; but at least one is required for
COBOL users. Card format is free field and the entires may occur in any
order. Blanks or commas may be used as separators, but are not required.
The fields required by COBOL follow:
SCR=x
1-3 decimal digits describing number of segments of system
scratch required to hold the intermediate output of the COBOL
compiler and the uSer's scratch files during execution. SCR=8
60229400
Need help?
Do you have a question about the 3300 and is the answer not in the manual?