Control Data Corporation 3300 Reference Manual page 174

60229400
LAST DETAIL integer-4: Last line number of last normal (detail or control)
report group. No detail or control heading report group will extend beyond
integer-4.
FOOTING integer-5: Last line number of last control footing report group.
No control footing report group will start before integer-3 nor extend beyond
integer-5. Page footing report groups follow integer-5.
\Vhen relative line numbers are specified for report groups, PAGE LIMITS
integer-l is specified and some or all of HEADING, FIRST DETAIL, LAST
DETAIL, and FOOTING, clauses are omitted, the following implicit control
is assumed for the omitted specifications:
If
HEADING integer-2 is omitted, integer-2 is considered equivalent to
the value 1, that is, LINE NUMBER one.
If
FIRST DETAIL integer-3 is omitted, integer-3 is considered equivalent
to the value of integer-2.
If LAST DETAIL integer-4 is omitted, integer-4 is considered equivalent
to the value of integer-5.
If FOOTING integer-5 is omitted, integer-5 is considered to be equivalent
to the value of integer-4. If both LAST DETAIL integer-4 and FOOTING
integer-5 are omitted, both are considered to be equivalent to the value
of integer-I.
The following chart represents the limits of page format when all options of
the PAGE LIMIT clause are specified:
Report Page Detail & Control . Page
Heading/ Heading Control Footing Footing
Footing Heading
integer-2
integer-3
i
I
integer-4
integer-5
I
integer-l
5-17