60229400
Standard ending reel label procedure and user's ending reel label
procedure (if specified by a USE statement) in the order specified by
the USE statement.
Reel swap.
Standard beginning reel label procedure and user's beginning reel label
procedure (if specified by a USE statement)
in
the order specified by the
USE statement.
When records are written for a teletypewriter or 211 display unit, the user
is responsible for determining the positioning of the data. The input-output
control system interprets the first. character of the file's record area before
the write operation is initiated.
If
the first character is the internal octal
code 36, the following action will take place before the record is displayed
on the device:
TTY
CRT
Action
Carriage return to the lefthand margin of the page. The
first character of the record is not printed.
Clear the screen and position the entry marker to the upper
lefthand corner of the screen. The first character of the
record is converted to a blank character and is displayed
as such.
When the first character of the record is other than internal code 36, the
record is displayed immediately following the last character written by a
previous WRITE request.
In
this case, the first character is always displayed
as presented by the WRITE request.
The ADVANCING option allows control of the vertical positioning of each
record on the printed page. The ADVANCING option overrides automatic
advancing.
Identifier-2 must be the name of a numeric elementary item described without
any positions to the right of the assumed decimal point. The mnemonic
name is defined in the Special-Names paragraph of the Environment Division;
it is identified with a printer carriage control character.
•
If
identifier-2 is specified, the printer page is advanced the number
of lines contained in identifier-2.
•
If
integer is specified, the printer page is advanced the number of
lines equal to the value of integer.
•
If
mnemonic-name is specified, the printer page is advanced
according to printer carriage control rules below:
4-75
Need help?
Do you have a question about the 3300 and is the answer not in the manual?