5-8
Format 1 indicates a report group; the report group extends from this entry
to the next report group (level 01) entry. The TYPE clause is required for
every report group to indicate whether the group is a heading, detail, or
footing group. If a control heading or control footing group is specified,
TYPE also indicates the control item which will cause these groups to be
generated.
Format 2:
nn [data-name-1]
[; COLUMN NUMBER IS integer-1]
[; GROUP INDICATE]
~
1
~IFIED
!
RIGHT ]
[
{
integer-2
} ]
; LINE NUMBER IS
PLUS integer-3
NEXT PAGE
~
lWcTURE
!
IS character-string]
[
. RESET ON
1
identifier-I! ]
'
FINAL
- - -
[; BLANK WHEN ZERO]
{
; SOURCE IS identifier-2
1
; SUM identifier-3
[, identifier-41 .•• [UPON data-name-2]
; VALUE IS literal-l
[; USAGE IS DISPLAY] .
Format 2 indicates an elementary item or group item within a report group.
If a report group consists of only one elementary entry, format 2 may include
TYPE and NEXT GROUP clauses to specify the report group and elementary
item in the same entry. In this case, the level number must be 01. Other-
wise, the level numbers in format 2 are in the range 02 to 49. Elementary
item descriptions are written (left to right) in the order in which they will
appear on the printed page. The position of a report group within a report
is determined by the TYPE clause.
60229400
Need help?
Do you have a question about the 3300 and is the answer not in the manual?