Stahl 8008/2 Installation, Operation & Maintenance Sheet

Explosion Protected
Control and Load Switch
(8008/2)
1

Contents

1. Contents ................................................................. 1
2. General Information ....................................................... 1
3. Application .............................................................. 1
4. Hazardous Location Ratings and Applicable
Standards .....................................................2
5. Safety Instructions ...........................................2
6. Technical Data ................................................3
7. Installation .........................................................4
8. Maintenance ..................................................4
9. Dimensions in Millimeters ....................................5
2

General Information

2.1 Contact Information
R. STAHL Inc.
13259 N. Promenade Blvd.
Stafford, TX 77477
Phone: +1 832 539 6700
Fax: +1 281 313 9302
Internet: www.rstahl.com
R. STAHL Schaltgeräte GmbH
Am Bahnhof 30
D-74638 Waldenburg
Phone: +49 7942 943-0
Fax: +49 7942 943-4333
Internet: www.stahl.de
2.2 Information regarding this Installation, Operation and
Maintenance Sheet
ID NO.: 251341 / 80 086 09 30 0
Publication Code: S-I0M-8008-00-en-2016-07-27
80 086 09 30 0 / 251341
Installation, Operation
& Maintenance Sheet
The explosion protected control components
should be installed, inspected, maintained,
and operated by qualified and competent
personnel. Read entire instructions
before starting installation of this product.
Contact your R. STAHL Customer Service or
R. STAHL distributor if you have any questions.
Technical information and illustrations are not
binding and subject to change without notice.
The nature of these instructions is only informative
and does not cover all of the details, variations or
combinations in which this device may be used, its
storage, delivery, installations, safe operation and
maintenance.
Since conditions of use of the product are outside of
the care, custody and control of the manufacturer, the
purchaser should determine the suitability of the
product for his intended use, and assumes all risk and
liability whatsoever in connection therewith.
Save these instructions for future reference.
3

Application

The series 8008 - Control and load switch (industrial control
equipment) - is a flameproof switch with increased safety
terminals suitable to make or break power supplies in
hazardous (classified) locations. The switch is a modular design
of up to 4 poles.
Refer to section 6 for application and details of the control
devices.
1/ 5 S-I0M-8008-01-en-2016-07-18