Installation Summary; Decommissioning The Ilumen Pidbox Utility; Disassembling The Pidbox Utility; Packing The Pidbox Utility - ILUMEN PIDBOX Installation Manual

Ilumen
8 I
NSTALLATION SUMMARY
1) Take the necessary safety precautions (DC switch of the inverter off).
2) Mount the Ilumen PIDbox utility correctly to a wall using the mounting holes.
3) Connect the Ilumen PIDbox utility earth bar to the frames of the PV modules and check
the interconnections between the PV casings.
4) Disconnect the PV array cables from the inverter.
5) Mind the maximum allowed current through the DC circuit breakers of the PIDbox utility
6) Connect the PV array cables to the Ilumen PIDbox utility inputs (see
7) Connect the Ilumen PIDbox utility to the inverter (see
8) Connect the AC power
9) Switch on the AC circuit breaker
10) Turn the DC switch on inside the inverter or the DC combiner box
9 D
ECOMMISSIONING THE
9.1 D
ISASSEMBLING THE
Switch off the Ilumen PIDbox utility by switching off the main AC circuit breaker. Switch off the
DC power to the PIDbox utility inside the inverter or the DC combiner box. Disconnect the
Ilumen PIDbox utility from the AC grid. Wait a minimum of 20 minutes. Disconnect the DC cables
from the PIDbox utility. Disconnect all earth connections.
When all electrical connections are disconnected you can dismount the Ilumen PIDbox utility.
When doing any kind of work on the PIDbox utility, always switch off the
DC power to the device inside the inverter or the DC combiner boxes.
9.2 P
ACKING THE
To pack the PIDbox utility use the original packaging or packaging suitable for the weight and
dimensions of the PIDbox utility (see Section 12 "Technical Data").
9.3 D
ISPOSING OF THE
Dispose of the PIDbox utility at the end of its service life in accordance with the disposal
regulations for electronic waste currently applicable at the installation site.
Installation Manual Ilumen PIDbox Utility v1.0
I
LUMEN
PID
BOX UTILITY
PID
BOX UTILITY
PID
BOX UTILITY
6.2 for details).
PID
BOX UTILITY
6.2 for details).
13