Manually Activate Dc-Circuit Breakers - ILUMEN PIDBOX Installation Manual

Ilumen
7.3 M
ANUALLY ACTIVATE
When it is necessary to manually activate the DC circuit breakers you can follow this guide
below. You can manually activate it e.g. when the AC-power is not connected but you still want
to use the PV-panels for your inverter.
You can manually activate the DC circuit breakers by opening up the plastic see-trough cover
and pressing the "I" button. If this doesn't work you will have to charge up the circuit breaker.
Pull the lever on the right side of the circuit breaker all the way down. Let go and repeat this
until the words "charged" appear in the window. Press the "I" button again. This should only be
done after all DC-connections are made.
'I'-button
Make sure all connections are made properly before activating the DC-circuit
breaker manually.
Installation Manual Ilumen PIDbox Utility v1.0
DC-
CIRCUIT BREAKERS
lever
12