Qualifications Of Skilled Persons; Safety Precautions; Electric Shock; Electrostatic Discharge - ILUMEN PIDBOX Installation Manual

Ilumen
2.2 Q
UALIFICATIONS OF SKILLED PERSONS
The work described in this document must be performed by skilled personnel only. Skilled
personnel must have the following qualifications:
 Knowledge of how an inverter works and how it is operated
 Training in how to deal with the dangers and risks involved in installing and operating
electrical devices and plants
 Training in the installation and commissioning of electrical devices and plants
 Knowledge of all applicable standards and directives
 Knowledge and observance of this document and all safety precautions
2.3 S
AFETY PRECAUTIONS
2.3.1 E
LECTRIC SHOCK
When the Ilumen PIDbox utility is in operation, voltage will be present. Prior to
maintenance work on the PV plant switch off the Ilumen PIDbox utility.
When you want to change the arrangement of the Ilumen PIDbox utility you must switch
off the Ilumen PIDbox utility 20 minutes prior to making any changes.
2.3.2 E
LECTROSTATIC DISCHARGE
Never operate the Ilumen PIDbox utility when not properly installed or when the
components are not closed properly. Always make sure the grounding of the Ilumen
PIDbox utility is done correctly.
3 S
COPE OF DELIVERY
1x Ilumen PIDbox utility
Containing the following components
a. iLumen PID controller
b. PLC
c. iLumen Energy meter
d. Timer
e. 1 or 2 automated DC-circuit breakers (according the ordering form)
f. Installation manual
4 P
RODUCT DESCRIPTION
The Ilumen PIDbox utility is placed between the inverter and the solar array strings. The power
of the strings goes through the PIDbox utility, entering on one side "PV in" and leaving on the
other "Inv. out". This means the Ilumen PIDbox utility is placed in series between the PV panels
and the inverter. You can use one Ilumen PIDbox utility per 1 or 2 MPP trackers (when ordered
with 1 or 2 DC-circuit breakers respectively).
Installation Manual Ilumen PIDbox Utility v1.0
5