Crestron IntelliClass IC-300-CSP-P Quick Start Manual

IntelliClass
Crestron ® IntelliClass™ systems provide educators with a simplified yet comprehensive
classroom presentation solution that saves time and money. Designed to deliver the
highest level of quality and convenience without using up the AV/IT budget, IntelliClass
assembles all the vital pieces needed to outfit the classrooms for an engaging teaching
experience.
IntelliClass makes it easy and affordable to install a quality projection system in every
classroom, ending the days of wheeling in the AV cart, or forcing students to squint at a
tiny TV screen. The IC-300-CSP-P package includes a professional wall mount controller,
a pair of high-performance ceiling speakers, a compact stereo amplifier, a universal
projector ceiling mount, wall plate inputs for (one) video and (two) VGA computer sources,
cabling and connectors. Just add a preferred video projector and screen to complete the
classroom presentation system. IntelliClass also integrates seamlessly with interactive
whiteboards and wireless microphones.
The diagram to the right shows a typical IC-300-CSP-P system arrangement.
1
Verify Contents
Before starting installation procedures, check the contents of the system package.
The items that should have been received are listed in the following table. Retain
all documents and parts supplied for use in the installation process.
DESCRIPTION
Media Presentation Controller, White
Media Presentation Audio Amplifier
Ceiling Mount Media Presentation Speakers, Pair, White
Media Presentation Wall Plate, Video & Audio, White
Media Presentation Wall Plate, VGA & Audio, White
Universal Projector Mount, White
Power Pack for MP-AMP30
PoE Injector for MPC-M5
RS-232 Projector Control Cable, Plenum, 50 ft (15 m)
Ethernet LAN Cable, Plenum, 50 ft (15 m)
Speaker Cable, 16AWG, Plenum, 35 ft (11 m)
RCA Video & Stereo Audio Cable, Plenum, 50 ft (15 m)
HD15 VGA Cable, Plenum, 50 ft (15 m)
RCA Stereo Audio Cable, Plenum, 50 ft (15 m)
Projector-to-Amplifier RCA Stereo Audio Cable, 3 ft (1 m)
RCA to 3.5mm Mini-TRS Stereo Audio Adapter
1-Gang Decorator Style Faceplate, White
1-Gang Low-Voltage Trim Ring
2-Gang Low-Voltage Trim Ring
1. Each package includes a 2-gang post-construction trim ring for the MPC-M5-W, and a 1-gang post-construction
trim ring and decorator style faceplate for each wall plate.
2. Specified in illustration on page 2.
3. Includes uninstalled RCA and/or BNC compression connectors as required for termination at the wall plate.
Installation requires IDEAL OmniSeal™ 30-793 or equivalent compression tool (not included).
1
QUICKSTART DOC. 7054B (2028482)
™
IC-300-CSP-P
Complete Classroom AV System Package
PART NUMBER QTY
MPC-M5-W 1
MP-AMP30 1
FSDI8-W 1
2
1
MP-WP100-W 1 Installation
MP-WP131-W 1 2
1. Refer to the documentation supplied with the projector to determine the
PMTC-50-6W 1
PW-2420RU 1
PWE-4803RU 1
2. Install the PMTC-50-6W Universal Projector Ceiling Mount following the
CBL-KSERIAL-DB9-L-P-50 2 1
CBL-CAT5E-P-50 2 1
CBL-SPK-P-35 2
3. Mount the MP-AMP30 Media Presentation Audio Amplifier to the
CBL-KAV-RCAM3-L-P-50 2, 3 1
CBL-KVGA-L-P-50 2, 3 2
2
CBL-KAUDIO-RCAM2-L-P-50 2
4. Mount the FSDI8-W speakers in the ceiling grid following the instructions
(Supplied with MP-AMP30) 1
CBL-AUDIO-RCAF-0.5 2 4
5. Mount the Media Presentation Wall Plate devices in appropriate locations
FPL-G1-W-T 3
BB-G1-LV 3
6. Run the cables for the system. The supplied cables are plenum rated so
1
BB-G2-LV
7. Terminate BNC and RCA fittings as required.
8. Configure the MPC-M5 using the MPC Wizard in SystemBuilder™. Refer to the
www.crestron.com
12.12
Specifications subject to
change without notice.
- 3 5
K - P
- S P 0
P 3
B L
) C - A M
( x 2
M P
3 5 '
R
W E
P O
A C R D
C O
ON
ES TR
CR
P 30
-A M
TS PW-2420RU
M P W AT
15
LS
NE
AN
2 CH
3 '
M P
- W
P 1
CEILING
SPEAKERS AU DIO
FSDI8-W
*
U D
- A
G A
VG A
L - V
C B
M P
- W
LAPTOP P 1
AU DIO
*
U D
- A
VG
G A A
L - V
C B
M P
- W
LAPTOP P 1
*
C A
L - R
C B
2 *
VCR DVD C A
L - R
C B
optimum mounting location. Refer also to the typical hookup arrangement
❸
diagram provided in section on page 2.
instructions contained in the latest version of the Installation Guide
(Doc. 7013), supplied.
PMTC-50-6W, using four screws, eight washers, and four wingnuts
(provided). Refer to the diagram to the right for details.
contained in the latest version of the QuickStart Guide (Doc. 7070), supplied.
in the room.
they can be routed above the ceiling, and are already terminated for the
projector end. The opposite ends are not terminated to make it easier to
route the cables through the walls and ceiling.
instructions contained in the latest version of the Operations & Installation Guide
(Doc. 6955), supplied.
888.273.7876 201.767.3400
CEILING
MOUNT
PMTC-50-6W
R
W E
P O
A C R D
C O
P W
E - 4
d io 8 0
PROJECTOR N
A u LA
3 R LAN
5 0 '
3 1 U N P oE
LA
e o
C A
C o
V id
T 5
5 0 ' n t r
E C
o l
C a a b
b le le 5
5 0 ' 0 '
d io
A u E N
R E E N
5 0 ' S C R E
S C U P U P
3 1
E N E N
R E R E
S C S C W N W N
D O D O
e o H TS H TS
LI G
V id LI G O N
O N
5 0 '
H TS H TS
LI G LI G
O FF O FF
R R
W E W E
P O P O
M E M E
LU
V O V O LU
U P U P
M E M E
LU LU
V O V O W N W N
D O D O
D V D V D D
P P
P TO P TO
LA
LA 5 5 5 5
C -M C -M C -M C -M
P C P C M P M P M P M P
0 0
b le
C a 5
A /V
C - M
5 0 '
M P
*These Cables Sold Separately
Ceiling Tile
PMTC-50-6W
Tools Required - Not Supplied
Hand-Held Drill
Wire Cutter
Wire Stripper
Philips Screwdriver(s)
Flathead Screwdriver(s)
Compression Tool for supplied RCA and
BNC connectors (Refer to footnote 3
in the table on this page.)
Wingnut (4)
Washer (4)
Washer (4)
Screw (4)
MP-AMP30