Additional References For Configuring Pseudowire - Cisco T1 Configuration Manual

Overview of Circuit Emulation
Commands
payload-size dejitter-buffer
class cem
controller t1
xconnect

Additional References for Configuring Pseudowire

Related Documents
Related Topic
Cisco IOS commands
Standards and RFCs
Standard/RFC
—
MIBs
MIB
—
Document Title
Cisco IOS Master Commands List, All Releases
Title
There are no standards and RFCs for this feature.
MIBs Link
To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco
MIB Locator found at the following URL:
http://www.cisco.com/go/mibs
48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)
Additional References for Configuring Pseudowire
URL
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/
interface/command/ir-cr-book/
ir-o1.html#wp3946673156
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/
interface/command/ir-cr-book/
ir-c1.html#wp2169323859
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/
interface/command/ir-cr-book/
ir-c2.html#wp1472647421
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/
interface/command/ir-cr-book/
ir-t2.html#wp8578094790
25