Accuracy & Repeatability - Fluke Micro-Bath 7102 User Manual

"CAL" is displayed.
2. Press "SET" five times until "
3. Press "SET" then use the "UP" or "DOWN" keys until the correct nu merical
setting is displayed. Press "SET" to accept the new value.
4. Repeat step 2 for ALPHA and DELTA.
12.2.3 Accuracy & Repeatability
Check the accuracy of the Micro-Bath at various points over the calibrated range.
If Micro-Bath does not pass specification at all set-points, repeat the Calibration
Procedure.
R0" is displayed.
Calibration Procedure
Calibration Procedure
51