SECTION 8 – FLIGHT PLANNING
10) Turn either FMS Knob to highlight the desired exit
point.
Figure 8-18 Select Desired Exit Point
11) With the desired exit point highlighted, press the
ENT Key.
12) With 'LOAD?' highlighted, press the ENT Key.
Figure 8-19 Airway Added to Flight Plan
8.9
LOAD A DEPARTURE
See the Procedures section for a discussion on loading
and activating departure procedures.
8.10 LOAD AN ARRIVAL
See the Procedures section for a discussion on loading
and activating arrival procedures.
8-6
Garmin G1000 Cockpit Reference Guide for the Columbia 350/400
8.11 LOAD AN APPROACH
See the Procedures section for a discussion on loading
and activating approach procedures.
8.12 REMOVE A DEPARTURE, ARRIVAL,
APPROACH, OR AIRWAY FROM A
FLIGHT PLAN
1) With the Active or Stored Flight Plan Page displayed,
press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to highlight the title for
the approach, departure, arrival, or airway to be
deleted. Titles appear in white directly above the
procedure's waypoints.
3) Press the CLR Key to display a confirmation window.
With 'OK' highlighted, press the ENT Key to remove
the selected procedure or airway.
8.13 STORE A FLIGHT PLAN
1) After creating a flight plan on either the PFD or
MFD, it may be saved by pressing the MENU Key.
2) Turn the large FMS Knob to highlight 'Store Flight
Plan' and press the ENT Key.
3) With 'OK' highlighted, press the ENT Key to store
the flight plan.
Figure 8-20 Store Flight Plan Confirmation
8.14 EDIT A STORED FLIGHT PLAN
1) Press the FPL Key and turn the small FMS Knob to
display the Flight Plan Catalog Page.
2) Press the FMS K n ob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired
190-00567-01 Rev. A