Section 10: Hazard Avoidance; Customizing The Hazard Displays On The Navigation Map; Stormscope ® (Optional, 350 Only); Displaying Stormscope Lightning Data On The - Garmin G1000 Columbia 350 Cockpit Reference Manual

SECTION 10: HAZARD AVOIDANCE

10.1 CUSTOMIZING THE HAZARD DISPLAYS
ON THE NAVIGATION MAP
1) With the Navigation Map Page displayed, press
the MENU Key to display the Navigation Map
Page Menu . The cursor flashes on the 'Map Setup'
option.
2) Press the ENT Key. The Map Setup Menu is
displayed. Turn the small FMS Knob to select the
'Weather' or 'Traffic' group to customize the display
of weather features. Select 'Traffic' to customize
the display of traffic.
3) Press the small FMS Knob to return to the

Navigation Map Page.

Figure 10-1 Page Menu
Figure 10-2 Map Setup Menu
Figure 10-3 Map Setup Group List
190-00567-01 Rev. A Garmin G1000 Cockpit Reference Guide for the Columbia 350/400
10.2 STORMSCOPE (OPTIONAL, 350 ONLY)
®
WARNING: The Stormscope system is not
intended to be used for hazardous thunderstorm
penetration. Weather information on the G1000
MFD is approved for weather avoidance only.
Refer to the WX-500 Pilot's Guide for detailed
operation.

Displaying Stormscope Lightning Data on the

Navigation Map Page
1) Select the MAP Softkey.
2) Select the STRMSCP Softkey. Select the STRMSCP
Softkey again to remove Stormscope Lightning Data
from the Navigation Map Page.
Figure 10-4 In-Flight Navigation Map Page Displaying
Stormscope Lightning Data
Lightning Age
Strike is less than 6 seconds old
Strike is between 6 and 60 seconds old
Strike is between 1 and 2 minutes old
Strike is between 2 and 3 minutes old
SECTION 10 – HAZARD
AVOIDANCE
Symbol
10-1