4. Installation
4.2 Product storage
If the inverter is not for using at present, it should be stored under the specific environment:
Please use the original box to repackage the inverter, and retain the desiccant.
Packing boxes should be sealed with adhesive tape.
Please store the inverter in a clean and dry place, and keep it without the erosion of dust and
vapor.
Storage temperature should be kept at -25℃-60℃,and the relative humidity should be kept
between 0 to 95%.And kept no condensation.
The maximum cumulative number of layers should not be more than 4 when stack of multiple
inverters.
Please avoid the chemical corrosive substances,because it maybe corrod the inverter.
The regular inspection is needed during the storage. If found the rat bite etc.,should replace the packing
material in time
The packing box should not be inclined or upside down.
After long-term storage, the inverter needs to be fully examined and tested by professional
person before using.
.10.
5.1 Select a Location for the Inverter
To select a location for the inverter the following criteria should be considered:
Do not install the inverter in unventilated confined space. To avoid poor performance
or damage inverter, air flow is needed.
Exposure to direct sunlight will increase the operational temperature of the inverter
andmay cause output power limiting. Ginlong recommend inverter installed to avoid
directsunlight or raining.
Shaded or sheltered positions are recommended for maximum performance and
service life.
Figure 5.1 Recommended installation position
5. Installation
.11.