Specification - Ningbo Ginlong Technologies Solis-20K Installation And Operation Manual

9. Trouble Shooting
NOTE:
If the inverter displays any alarm message as listed in Table 9.1; please turn
off the inverter (refer to Section 6.2 to stop your inverter) and wait for 5 minutes
before restarting it (refer to Section 5.1 to start your inverter). If the failure
persists, please contact your local distributor or the service center. The below
that we will need so that we can assist you.
1. Serial number of the Inverter;
2. The distributor/dealer of the Inverter (if available);
3. Installation date.
4. The description of problem (i.e. the alarm message displayed on the LCD and the
status of the LED status indicator lights. Other readings obtained from the Information
submenu (refer to Section 7.2) will also be helpful.);
5. Your contact details.
.44.
Model
The max DC input power
The max DC input voltage
Starting-up input voltage
MPPT operation range
Max dc input current
Number of MPPT/strings per MPPT
Rated output power
Rated grid voltage
The grid voltage range
Operation phase
Rated grid output current
Output power factor
Grid current THD
The dc injection current
Rated grid frequency
Max. Efficiency
Protection
Islanding protection; temperature protection;Lightning protection
Size(mm)
Weight
Topology
Internal consumption
Operating temperature
Ingress protection
Interface
Design lifetime
Operating Range Utility Frequency
Islanding protection, VA C FA C in accordance with UL 1741,
Utility Monitoring
Operation Surroundings Humidity
EMC

10. Specification

Solis-20K Solis-25K
23kW 28kW
1000V
350V
200～800V
18+18+18+18Adc
4/8
20kW 25kW
380V
304～460Vac(adjustable)
Three phase
28.7A 36.1A
>0.99
<3%
<50mA
50/60Hz
98.4%
DC reverse-polarity; AC short circuit protection;
530W*688H*356.5D
57.2kg 58.2kg
Transformerless
<1W(Night)
-25～60℃
IP65
Rs485 WIFI GPRS(Optional)
>20years
47-52 or 57-62Hz
G59/3, AS4777, VDE 0126-1-1, VDE 4105, CEI 0-21, CQC
0～95%
EN61000-6-1:2007
EN61000-6-3:2007
. 45 .