Table of Contents
Advertisement
4. Product handing and storage
4.2 Product Storage
Use the original box to repackage the inverter, seal with adhesive tape with the desiccant
inside thebox.
.8.
5.1 Select a Location for the Inverter
To select a location for the inverter, the following criteria should be considered:
Do not install in small closed spaces where air cannot circulate freely. To avoid
overheating, always make sure the flow of air around the inverter is not blocked.
Exposure to direct sunlight will increase the operational temperature of the inverter and
may cause output power limiting. Ginlong recommends inverter installed to avoid
direct sunlight or raining.
To avoid over heating ambient air temperature must be considered when choosing
the inverter installation location. Ginlong recommends using a sun shade minimizing
direct sunlight when the ambient air temperature around the unit exceeds 104°F/40°C.
Figure 5.1 Recommended Installation locations
√
Vertical
5. Installation
≤15°
√
Backward
.9.
Advertisement
Table of Contents
