7. General Operation
Press the UP/DOWN keys to set time and data. Press the ENTER key to move from one
digit to the next (from left to right). Press the ESC key to save the settings and return to the
previous menu.
7.3.2 Setting Address
This function is used to set the address of an inverter connected to PC for communication
purpose. The address number can be assigned from"01"to "99"(see Figure 7.8). The
default address number of the inverter is "01".
Set Address
Slave
Y E S = < E N T > N O = < E S C >
E S C
Figure 7.8 Address setting
Press the UP/DOWN keys to set the address. Press the ENTER key to save the settings.
Press the ESC key to cancel the change and return to the previous menu.
7.3.3 Language Setting
This function is used to set the language of inverter LCD display.
.28.
2015-02-23 19 35
Address:01
U P
D O W N
E N T
7. General Operation
Set Language
Y E S = < E N T > N O = < E S C >
Figure 7.9 Language settings
Press the UP/DOWN keys to set the address. Press the ENTER key to save the settings.
Press the ESC key to cancel the change and return to the previous menu.
7.3.4 Screen Brightness Control
This function is used to set LCD screen brightness.
Brightness
Y E S = < E N T > N O = < E S C >
E S C
U P
Figure 7.10 Screen brightness adjustment
Press the UP/DOWN keys to set the brightness. Press the ENTER key to save the settings.
Press the ESC key to cancel the change and return to the previous menu.
2015-02-23 19 35
English
Chinese
2015-02-23 19 35
45%
D O W N
E N T
.29.