Clear Energy And Restore Factory Settings; Calibrate Energy; Change Password - Ningbo Ginlong Technologies Solis-20K Installation And Operation Manual

7. General Operation
This function is applicable by maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.

7.5.4 Clear Energy and Restore Factory Settings

Clear Energy can reset the history yield of inverter, restore factory settings means all the
settings are restored to default settings.
These two functions are applicable by maintenance personnel only, wrong
operation will prevent the inverter from working properly.

7.5.5 Calibrate Energy

Warranty or maintenance may result in reseting total generating data, this function allow
the maintenance personnel to amend the total generating data of replacement inverter to
the original one.
By using our data monitoring hardware, the data on monitoring website can automatically
synchronize with the preset total generating power of inverter.
Calibrate
Total generating power :
Adjusting total generating power
Y E S = < E N T > N O = < E S C >
E S C U P
Figure 7.29 Setting the total generating capacity
Press the DOWN key to move the cursor, Press the UP key to revise the value. Press the
ENTER key to execute the setting. Press the ESC key to return to the previous menu.
.40.
0002616kWh
2015-02-23 19 35
D O W N E N T
7. General Operation

7.5.6 Change Password

First enter the current password, Press the DOWN key to move the cursor, press the
UP key to revise the password figure.
Password
Please Input The Current Password
X
Y E S = < E N T > N O = < E S C >
E S C U P
Figure 7.30 Password setting
After entering the correct password, you can create a new password.Upon confirming
the new password, press the ENTER key to execute the setting.(See Figure 7.31).
Reset Password
Please Input New Password
X
Y E S = < E N T > N O = < E S C >
E S C U P
Figure 7.31 Setting new password
2015-02-23 19 35
X X X
D O W N E N T
2015-02-23 19 35
X X X
D O W N E N T
.41.