Wall Mounting - Cisco MS200X-24 Quick Start Manual

After the brackets are securely attached, the switch is now ready to
S 3
TEP
be installed into a standard 19-inch rack as shown below.

Wall Mounting

The MS200X switch can be wall-mounted by utilizing the supplied rack
mounting brackets.
Insecure mounting might damage the switch or cause injury.
W
ARNING
Cisco is not responsible for damages incurred by insecure
wall-mounting.
To mount the switch to the wall:
Determine where you want to mount the switch. Verify that the
S 1
TEP
surface is smooth, flat, dry, and sturdy.
Attach one of the supplied brackets on the side of the switch, and
S 2
TEP
use two pan head M5 screws to secure it.
Follow the same steps to attach the second bracket to the
S 3
TEP
opposite side.
18 Cisco MS200X Series 10/100 24-Port Ethernet Access Switches