Front Panel - Cisco MS200X-24 Quick Start Manual

Model
MS200X-24S 24 10/100M RJ-45 Ethernet ports, 2 dual-purpose ports
MS200X-24P 24 10/100M RJ-45 Ethernet ports with PoE support,

Front Panel

Link/ACT
RJ-45
Ethernet
Ports
MiniGBIC
Ports
Console Port The Console port is used to connect the supplied
Link/ACT
Lights
Cisco MS200X Series 10/100 24-Port Ethernet Access Switches
Configuration
(2 10/100/1000M RJ-45 ports and 2 SFP module slots),
and 1 RJ-45 console port
2 dual-purpose ports (2 10/100/1000M RJ-45 ports and
2 SFP module slots), and 1 RJ-45 console port
PoE Light
Light (if present)
The RJ-45 Ethernet ports are used to connect network
devices (such as computers, printers, and access points)
to the switch.
The miniGBIC (Gigabit Interface Converter) ports are
connection points for miniGBIC modules, so the switch
can uplink to other switches by using fiber-optic cable.
• The miniGBIC ports are compatible with Cisco
miniGBIC modules MFEBX1, MFEFX1, MFELX1,
MGBBX1, MGBLH1, MGBLX1, and MGBSX1.
• The miniGBIC port is a combination port, shared with
one other RJ-45 port. When the miniGBIC port is
active, the adjacent RJ-45 port is disabled.
• The lights of the corresponding RJ-45 ports light to
the respond to the miniGBIC port traffic.
console cable to a computer's serial port for
configuration using a terminal emulation program.
(Green) These lights are located on the left of the
10/100M RJ-45 Ethernet ports. Lights steady when a
10/100 Mbps link between the corresponding port and
other device is detected. Flashes when the port is
passing traffic.
24 x RJ-45
Ethernet Ports
Link/ACT Console
Light Port
2 x Dual-purpose
Ports
15