Front Panel - Cisco Catalyst IE9300 Hardware Installation Manual

Cisco IE9300 Rugged Series Overview

Front Panel

All the ports and LEDs of Cisco Catalyst IE9300 Rugged Series Switches are on the front panel. This section
shows the arrangement of features on the front panel; see other sections for detailed information about ports
and LEDs.
Note
Figure 1: Cisco Catalyst IE9300 Rugged Series Switch Front Panel
1
2
• LEDs are distributed over the front panel, each one near the interface it relates to. System status
LEDs that are not associated with a specific interface are on the left side of the front panel.
• The front panels of IE9310 and IE9320 models are nearly identical. Later sections note the few
differences.
• The power supply LEDs are visible on the rear of the switch, where the units are installed.
Display mode button
Express Setup button
Cisco Catalyst IE9300 Rugged Series Switch Hardware Installation Guide
6 Alarms
7 RJ-45 console port
Front Panel
3