signia StreamLine Mic Quick Start Manual page 2

Pairing StreamLine Mic with hearing aids
1. Ensure that StreamLine Mic is off: Hold down the
until the power indicator is off. This takes approximately
6 seconds.
2. Turn the hearing instruments off and on again:
Open and close the battery compartments. If your hearing
instruments do not have a battery compartment, turn them
off and on as described in the hearing instrument's user
guide.
3. The hearing instruments are now ready for pairing. You have
3 minutes to complete the pairing.
4. Turn on StreamLine Mic: Hold down the button until
the power indicator is green . This takes approximately
3 seconds.
5. The status indicator flashes yellow .
6. Place both hearing instruments close
to StreamLine Mic (maximum distance
8 inches).
7. The pairing process starts automatically
Pairing is finished when the status indicator
is yellow .
Pairing StreamLine Mic with smart phones
1. Hold down the and the button simultaneously
until the status indicator flashes blue . This takes
approximately 6 seconds.
StreamLine Mic is now ready for pairing. You have 3 minutes
to complete the pairing.
2. Set your smartphone or music player to "search for other
Bluetooth ® devices". Refer to the device's manual.
3. On your smartphone or music player, select
"StreamLine Mic" from the list of detected devices.
button 4. If requested, enter the PIN "0000".
Pairing is finished when the status indicator
Making phone calls
StreamLine Mic should be worn as illustrated in the pictures
for best possible performance. It is important that the
microphone of StreamLine Mic is pointing towards your
mouth, and that StreamLine Mic is not covered by clothes etc.
Maximum distance:
• Smartphone — StreamLine Mic: 33 ft
• Hearing instruments — StreamLine Mic: 6.5 ft
Receiving a call
You will hear a ringtone in your hearing instruments.
The status indicator flashes green
1. To accept/end the call, press or accept/end the call
with your smartphone.
While you are in a call, the status indicator
green .
2. To reject a call, hold down the button for
approximately 3 seconds.
1
Making a call
When you call someone with your connected smartphone,
the call is automatically streamed to your hearing instruments.
While you are in a call, the status indicator
is blue .
This function is not available while StreamLine Mic is used as a
remote microphone.
Further information
Voice dialing: When connected to a smartphone, double-
press to activate voice dialing (if supported by the
smartphone).
Listening to music
If StreamLine Mic is connected to a music player through
Bluetooth, the music will automatically be played in your
hearing instruments. You do not need to operate anything on
StreamLine Mic.
While music is streamed, the status indicator
Maximum distances:
• Music player — StreamLine Mic: 33 ft
• Hearing instruments — StreamLine Mic: 6.5 ft
Starting/stopping music
• Use your smartphone or music player to start/stop
.
the music.
To stop the music, you can also shortly press
on StreamLine Mic.
is
2
Use as a remote microphone
The remote microphone function does not start automatically.
is green . You have to toggle to the remote microphone mode via the
button.
It is important that the microphone is pointing towards the
speaker's mouth, and that StreamLine Mic is not covered by
clothes etc.
Maximum distance:
• Hearing instruments — StreamLine Mic: 66 ft
Turning remote microphone on
• Press for approximately 3 seconds.
is orange .
The status indicator is magenta
tone is played in your hearing instruments.
The remote microphones are turned on. Speech from the
person wearing StreamLine Mic is streamed directly to
your hearing instruments.
Turning remote microphone off
• Hold down the button for approximately 3 seconds.
The status indicator is blue
a smartphone) or yellow
smartphone).
3
. A confirmation
(connected to
(not connected to a
4