Connecting The Power Supply To Ac Power; Ws-Ap3660 Power Supply Ac Connector Assembly - Enterasys WS-AP3660 Installation Manual

Installation

Connecting the Power Supply to AC Power

The WS-AP3660 Power Supply provides a power receptacle for connecting the unit to an external
AC power source. The power supply is shipped with a waterproof AC connector assembly (see
Figure 2-15), but a power cord is not provided. Before connecting the power supply to AC power,
the AC connector assembly must be installed onto the power cord.
Figure 2-15
1 Sealing nut
2 Clamp ring
Install the waterproof connector assembly as follows:
1. Strip the power cord sheath.
2. Insert the clamp ring and seal into the body.
2-16

WS-AP3660 Power Supply AC Connector Assembly

3 Seal
4 Body
WS-AP3660 Power Supply Installation Procedures
5 Housing assembly