Table of Contents
Advertisement
WS-AP3660
Canada Conformance Standards
This equipment meets the following conformance standards:
Safety
•
C22.2 No.60950-1-03
EMC
•
ICES-003, Class B
Radio transceiver
•
RSS-210 (2.4 GHz and 5GHz)
Other
•
IEEE 802.11a (5 GHz)
•
IEEE 802.11b/g (2.4 GHz)
•
IEEE 802.11n (WS-AP3660)
•
IEEE 802.3af (PoE)
External Antennas
The external antennas used with the WS-AP3660 must be approved and certified before use.
However, in order to comply with the local laws and regulations, an approval may be required by
the local regulatory authorities.
For a list of approved external antennas, see
page B-10.
RF Safety Distance
The antennas used for this transmitter must be installed to provide a separation distance of at least
25 cm from all persons and must not be co-located or operating in conjunction with another
antenna or transmitter.
European Community
The WS-AP3660s are designed for use in the European Union and other countries with similar
regulatory restrictions where the end user or installer is allowed to configure the WS-AP3660 for
operation by entry of a country code relative to a specific country. After the country code is
selected, the WS-AP3660 will use the proper frequencies and power outputs for that country code.
The WS-AP3660 is intended for outdoor use and must be installed in a proper outdoor location.
Contact local Authority for procedure to follow and regulatory information. For more details on
legal combinations of frequencies, power levels and antennas, contact Enterasys.
Declaration of Conformity with R&TTE Directive of the European Union 1999/5/EC
The following symbol indicates compliance with the Essential Requirements of the R&TTE
Directive of the European Union (1999/5/EC).
B-4 Regulatory Information
"WS-AP3660 Approved External
Antennas" on
Hide quick links:
Advertisement
Table of Contents
