Advertisement
When using Mac OS X®
3
1
S
Checking wheel operation
Check USB ports
S
tep
tep
Check the USB port on your computer.
Check that the vertical and horizontal scrolling functions are
working correctly in Safari.
Click the Safari icon in the Dock.
USB port
Safari will launch.
Any USB port may be used.
y
This product can be connected to a USB hub. However, it
y
may not work depending on the power supply capability
of the USB hub.
Display your favourite web site in Safari and change the
size of the window so that the vertical and horizontal
2
scrollbars appear.
Installing the Receiver Unit
S
tep
* The sample website used here is the ELECOM homepage.
Activate the Macintosh.
y
Wait until Mac OS X has started up completely.
Insert the receiver unit into a USB port on your Macin-
tosh.
Insert here.
Scroll the wheel back and forth.
USB port
Receiver unit
Carefully check the orientation of the connector
y
and the place where you will connect the receiver
The mouse is operating normally if the screen moves up
unit.
and down as you scroll the wheel.
If you feel strong resistance when inserting the
y
receiver unit, check that the shape and orientation
y
of the connector is correct. Using excessive force
may damage the connector and cause injury.
Do not touch the USB connector terminals.
y
The mouse driver is installed automatically.
Troubleshooting
When the product appears to be malfunctioning
„
When the mouse pointer on the screen does not move,
or moves unstably, when the mouse is moved
It is possible that the reflectivity of the surface on which this
product is being used is not suitable for an laser mouse.
When using this product on a metallic surface such as a steel
desk, radio wave outreach may be shortened. In such cases,
move the receiver unit closer to the mouse until mouse
operation stabilises.
If Safari is not in the Dock, double-click
It is possible that the receiver unit is not connected correctly to
the Safari icon in the Applications folder.
the USB port. Disconnect the receiver unit from the USB port and
reconnect it.
The receiver unit and the mouse body are too far apart or there
is a possibility that the receiver unit is facing in a direction from
which it cannot receive radio signals.
Adjust the position of the
Scrollbar
receiver unit. The operable
range of this product is the area
within a circle with a radius of
10 m from the receiver unit.
Depending on the usage
environment, the mouse may
not operate even when it is
within approximately 10 m of
the receiver unit. In such cases, move the mouse closer to the
receiver unit until operation stabilises.
Interference may occur if multiple units of this product are used
together or if this product is used with other wireless devices. In
this case, change the channel of other wireless devices.
(Multiple units of this product have an automatic channel
avoidance function.)
Operation becomes unstable when battery power is low. See
"Installing·Replacing the Battery" on the reverse of this sheet, and
In applications that do not support scrolling, the
replace the batteries as soon as possible.
screen will not move when you scroll the wheel.
y
The alkaline batteries supplied with this product are for
checking product operation. These batteries may discharge
and drain during storing and shipping.
* When not using the mouse, turn it off to save battery power.
Check that the remaining battery level indicator lamp is on.
When the mouse is turned on, the remaining battery level
indicator lamp is illuminated in red for a certain period.
If the lamp does not turn on, it is possible that the battery is flat.
When the battery is low, the lamp flashes continuously.
Check that the power switch is correctly in the ON position.
If the power switch is not slid all the way to the correct ON
position, the mouse may not turn on.
It is possible that the standard Windows mouse driver did not
install correctly and that this product is detected as an unknown
device by Windows®. This product is usually detected as a USB
human interface device. If it is detected as an unknown device, see
"Removing an unknown device, " and after removing the device
from Device Manager, repeat "Step 2 - Installing the Receiver Unit"
on the front of this sheet.
If you have installed drivers and settings utilities produced by the
original manufacturer for a previous mouse, uninstall them first.
This product may not operate correctly if a driver made by another
company is installed. See the instruction manual that was supplied
with your previous mouse for uninstall instructions.
It is possible that the driver is conflicting with another driver
such as that for a laptop touch pad. To use this product
correctly, you must delete the touch pad driver. However, if you
delete this driver, you may not be able to use the touch pad or
touch pad functions. Contact the PC manufacturer for more
details.
The wheel moves, but the mouse cursor does not
„
In certain applications that do not support the scrolling
function, the mouse cursor will not move when you move the
wheel.
Removing an unknown device
If the standard Windows mouse driver did not install correctly and
this product is detected as an unknown device, remove the unknown
device from Device Manager, and then repeat "Step 2 - Installing the
Receiver Unit" on the front of this sheet.
If there are multiple unknown devices, before
y
removing a device, check that it is actually this
product. Disconnect the receiver unit and check
which unknown device disappears. The device that
disappears is this product.
y
If the unknown device does not disappear even after
you have deleted the driver following the instructions
below, it is possible that there is something wrong
with the PC. Contact the PC manufacturer.
With the receiver unit connected to the PC, follow the procedure below
to remove the unknown device.
* Be sure to log on using an administrator account when Windows starts
up.
* Screen display may differ depending on operating system, but the
procedure remains the same.
Display Device Manager.
Windows® 7 and Windows Vista®
y
1. From the [Start] menu, right-click [Computer].
2. Click [Properties].
3. Click [Device Manager].
y
Windows® XP
Approxi-
1. From the [Start] menu, right-click [My Computer].
mately 10 m
2. Click [Properties].
Reciever unit
3. Click the [Hardware] tab.
4. Click
.
The Device Manager window appears. Right-click the unknown device,
and click [Uninstall].
Click
.
Disconnect the receiver unit and
restart the PC
Repeat the procedure from "Step 2
- Installing the Receiver Unit" on the
front of this sheet.
- 2 -
Basic specifications
Product name
Wireless Laser Mouse
Article No.
M-SN2DL Series
OS
Windows 7, Windows Vista (up to SP2),
Windows XP (SP2 to SP3)
Mac OS X (10.5 to 10.5.8, 10.6 to 10.6.4)
Resolution (dpi)
1600
Interface
USB
Radio frequency
2.4 GHz bandwidth
Radio wave method
DSSS modulation
Radio wave outreach
Non-magnetic substance (e.g. wooden desk): Approx.
10 m
Magnetic substance (e.g. metal desk): Approx. 3 m
* Test values in the ELECOM environment
Mouse body dimensions
75(W) x 110 (D) x 38 (H) mm
Receiver unit dimensions 16 (W) x 19 (D) x 8 (H) mm
Operating temperature/
5 to 40°C, 90% RH max. (no condensation)
humidity
Storing temperature/
-10 to 60°C, 90% RH max. (no condensation)
humidity
Batteries
AAA alkaline battery, AAA manganese battery, AAA
nickel hydride battery
Operating time
Measure of the operating time when an AAA alkaline
battery is used
Continuous operating time: Approx. 71 hours
Continuous standby time: Approx. 95 days
당해 무선설비는 운용 중 전파혼신 가능성이 있음 .
Estimated serviceable time: Approx. 32 days
(when the PC is operated for eight hours a day
이 기기는 가정용으로 전자파적합등록을 한 기기로서
and 25% of the PC operation is assigned to mouse
주거지역에서는 물론 모든 지역에서 사용할 수 있습니다 .
operation)
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不
得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；
經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設
備之干擾。
ELECOM CO., LTD.
•
This manual is copyright of ELECOM Co., Ltd.
•
Unauthorised copying and/or reproducing of all or part of
1-1 Fushimi-machi 4-Chome Chuoku, Osaka Japan 541-8765
this manual is prohibited.
•
The specifications and appearance of this product may be
宜麗客 （上海） 貿易有限公司
changed without prior notice for product improvement
上海市徐匯区肇嘉浜路1065甲号飛雕国際大厦704号
purposes.
電話 : 86-21-33680011
•
ELECOM Co., Ltd. shall bear no responsibility for any and all
FAX : 86-21-64271706
affects resulting from the use of this product regardless of
URL : http://www.elecom-china.com/
the above reasons.
ELECOM (SHANGHAI) TRADING CO. , LTD.
•
Export or service transaction permission under the Foreign
Rm 704 , Feidiao International Bldg , 1065 ZhaoJiaBang Rd , Shanghai ,
Exchange and Foreign Trade Control Law is required in
China 200030
order to export this product or parts of this product that
TEL : 86-21-33680011
constitute strategic materials or services.
FAX : 86-21-64271706
•
Windows and the Windows logo are trademarks of the Microsoft
URL : http://www.elecom-china.com/
group of companies.
Elecom Korea Co., Ltd.
•
Mac, Mac OS, and Macintosh are registered trademarks or
5F Suam Bldg. 1358-17, Seocho2-dong, Seocho-gu, Seoul 137-862,
trademarks of Apple Inc., in the United States
Korea
•
Company names, product names, and other names in this manual
TEL : 1588-9514
are generally trademarks or registered trademarks.
FAX : (02)3472-5533
URL : www.elecom.co.kr
B 급 기기 ( 가정용 정보통신기기 )
廢電池請回收
Wireless Laser Mouse
M-SN2DL Series User's manual
2nd edition, November 20, 2009
ELECOM Co., Ltd.
©2009 ELECOM Co., Ltd. All Rights Reserved.
Advertisement
