4320(W)
Opening the plug
connection
Closing the plug
connection
ba76140e02
10/2017
2.2
Opening and closing the IDS plug connection (4320W)
This section only applies to the IDS plug variant, 4320W
4
3
Guidance
Groove
If necessary, clean the plug connection.
Open the locking device (step 1).
Use your thumb and index finger to press the clips of the connector togeth-
er, and pull the connector out of the plug (step 2).
Make sure that the plug connection is completely dry and clean.
Align the guidance of the connector with the groove in the plug and insert
the connector in the unlocked plug until it catches (step 3).
Close the locking device (step 4).
Measurement / Operation
.
Plug connection
closed and locked
1
2
5