4320(W)
Structure
Automatic sensor
recognition
ba76140e02
10/2017
1
Overview
1.1
Structure and function
4320
4320W
1
1
Shaft
2
Connecting head with active sensor electronics
3
IDS plug (4320W)
4
Connection cable (4320)
The sensor electronics with the stored sensor data is in the connecting head.
The data include, among other things, the sensor type and series number.
With each calibration, the calibration data is written in the sensor and the
calibration history is recorded. The data is recalled by the meter when the
sensor is connected and is used for measurement and for measured value
documentation. Storing the calibration data in the sensor ensures that the
correct cell constant is automatically used if the sensor is operated with
several meters.
The digital transmission technique guarantees the failure-free communi-
cation with the meter even with long connection cables. If the sensor firmware
is enhanced by YSI, it can be updated with the meter.
1.2
Recommended fields of application
Measurements in ultrapure water.
OPERATING MANUAL
4
2
Overview
3
3