Electrical Connection - NetterVibration NED 605 Operating Instructions Manual

In critical installation situations the unit
must be secured additionally by a
steel rope, e.g. NSE.
Adjust the safety rope to the shortest
possible length by using the wire rope
DANGER
clips.
The safety rope must be under ten-
sion at all times!

6.2 Electrical connection

The electrical installation of the vibrators must be performed only by authorised,
qualified personnel.
The qualified personnel must use only insulated tools, which are suitable for the
IMPORTANT
application.
The mains voltage must comply with the nominal voltage indicated on the type
plate.
IMPORTANT
Connection example NED
The vibrators are delivered with a
cable.
Cable lengths:
NED 605
NED 5016
NED 50100 and 50200
NED 50500 to
NED 601510
The electric lines have to be laid with care. It has to be avoided that the cables
can be chafed through by vibrating parts.
The perfect condition of the electric lines incl. plugs has to be checked at regular
intervals (as a rule every six months). Defects which are discovered have to be
eliminated immediately. Protect the cable against high temperatures, lubricants
DANGER
and sharp edges.
3 m
4 m
3,5 m
2,5 m
12