Safety - NetterVibration NED 605 Operating Instructions Manual

2 Safety

Intended use:
The vibrators are intended for installation in
machines according to the device group
and the device category. These machines
use vibrations for sieving, loosening, con-
veying, compacting and separation of bulk
materials.
Any other use is considered improper use.
Netter electric external vibrators generate vibrations.
The operator of vibration systems has to protect his employees from actual or
potential threats to their health and safety due to vibrations.
WARNING
Netter GmbH does not assume any liability for injury or damage resulting
from technical modifications to the product or failure to observe the
instructions and warnings in this operating manual.
WARNING
Live parts can cause severe or even fatal injury.
DANGER
When working on the vibrators these must be isolated from the mains supply.
To do so please proceed as follows:
1. Switch off vibrator.
2. Secure against unintentional switching on.
DISCON-
3. Determine that the NEA and NEG are voltage-free.
NECT
POWER
4. Earth and short-circuit.
SUPPY
5. Cover and fence off neighbouring live parts.
The vibrators must not be touched
during operation or shortly after being
switched
HOT SUR-
vibrators may become very hot during
FACE
operation so that there is a risk of burning.
off. The surface of the
Qualification of the personnel:
Assembly, commissioning, maintenance
and repair of the vibrators must be
performed only by authorised qualified
personnel.
Any handling of the electric vibrators lies
within the responsibility of the operator.
Accessories which ensure the correct
operation and safety must provide a
protection type required for the specific
use.
6