Download  Print this page

Self-test Feature Check - Samsung SYNCMASTER 932MP User Manual

Samsung computer monitor user manual.
Hide thumbs

Advertisement

Self-Test Feature Check

Check the following items yourself before calling for service. Contact the
problems that you cannot solve by yourself.
Self-Test Feature Check
|
Not Supported Mode
Maintenance and Cleaning
1. Self-Test Feature Check
Your monitor provides a self test feature that allows you to check whether your monitor is functioning
properly.
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer.
3. Turn on the monitor.
The figure shown below ("Check Signal Cable") appears on a black background when the monitor is
in its normal working condition though it does not sense any video signal: While in the Self-Test
mode, the LED power indicator remains green and the figure moves around on the screen.
4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the
monitor.
If your monitor screen remains blank after using the previous procedure, check your video controller and
computer system; your monitor is functioning properly.
2. Not Supported Mode
This indicates the display resolution or refresh rate is not properly set on your computer video card. Reboot
the computer in Safe Mode and select "Default" in the "Refresh Rate Unknown" box while setting Adapter
for Display Properties.
|
Not Optimum Mode
|
Symptoms & Recommended Actions
service center
|
Display Adapter Driver
for

Advertisement

   Related Manuals for Samsung SYNCMASTER 932MP

Comments to this Manuals

Symbols: 0
Latest comments: