Download  Print this page

Samsung SYNCMASTER 932MP User Manual Page 33

Samsung computer monitor user manual.
Hide thumbs

Advertisement

If you adjust picture using Color Control function, Color Tone will turn to Custom mode.
Image Lock
Image Lock is used to fine-tune and get the best image by removing noise
that creates unstable images with jitter and shimmer. If satisfactory results
are not obtained using the Fine adjustment, use the Coarse adjustment and
then use Fine again.
- Available in PC Mode Only
1) Coarse
: Removes noise such as vertical stripes. Coarse adjustment may move
the screen image area. You may relocate it to the center using the
Horizontal Control menu.
2) Fine
: Removes noise such as horizontal stripes. If the noise persists even after
Fine tuning, repeat it after adjusting the frequency (clock speed).
3) Position
: Adjusts the screen location horizontally and vertically.
Auto
The values of Fine, Coarse, position are adjusted automatically.
Adjustment
If you change resolution in the control panel, Auto function will be executed.
- The direct button on the remote control is 'AUTO' button.
- Available in PC Mode Only
PIP Picture
You can adjust the PIP Screen Settings.
1) Contrast
: Adjusts the Contrast of the PIP window on the screen.
2) Brightness
: Adjusts the Brightness of the PIP window on the screen.
3) Sharpness
: Adjusts the difference between the lightest and darkest areas of the PIP
window.
4) Color
: Adjusts the Color of the PIP window on the screen.
5) Tint
: Adds a natural tone to the PIP window.
TV / Ext. / AV / S-Video / Component Mode
Available Mode
OSD
Description
Mode
The Monitor has four automatic picture settings ("Dynamic", "Standard",
"Movie" and "Custom") that are preset at the factory.
You can activate either Dynamic, Standard, Movie, or Custom. You can
select "Custom" which automatically recalls your personalized picture
: PC / DVI
: TV
: AV
: S-Video
: Component
Coarse / Fine
Position
Play/Stop

Advertisement

   Related Manuals for Samsung SYNCMASTER 932MP

Comments to this Manuals

Symbols: 0
Latest comments: