Connecting Your System - RCA U1000 Manual

Connecting your System

Once the U1000 phone is set up and has dial tone, it is ready to be wirelessly connected to the other U1100
phones and U1200 handsets that will make up your system. Once you have unboxed and plugged in your
U1100 phone or U1200 handset, they will be ready to register to the base.
To Register a U1100 Wireless Deskphone to the System
1. On your U1000 base, press the​ "Menu"​ softkey.
2. Using the directional pad, move the indicator to ​ " Add/Remove Remote."​ Press the ​ " Select" ​ s oftkey.
3. Select the "Registration" option and press the ​ " Select" softkey. This will put the U1000 base in
Registration Mode as it searches for another phone to register.
4. On your U1100 wireless deskphone, press the ​ " Reg" softkey. It will also enter Registration Mode and
search for the base.
5. If registration is successful, both phones will beep and display ​ " Registration Complete!" If registration is
not successful, move the phones closer together and try again.
To Register a U1200 Cordless Handset to the System
1. On your U1000 base, press the "​ M enu​ " softkey.
2. Using the directional pad, move the indicator to "​ A dd/Remove Phones​ . " Press the "​ S elect​ " softkey.
3. Select the "​ R egister Phone​ " option and press the "​ S elect​ " softkey. This will put the U1000 base in
Registration Mode as it searches for another phone to register.
4. On your U1200 cordless handset, press the "​ R eg​ " softkey. It will also enter Registration Mode and search
for the base.
5. If registration is successful, both phones will beep and display "​ R egistration Complete!​ " If registration is
not successful, move the phones closer together and try again.
NOTE: If your U1100 or U1200 does not display the "Press "REG" To Initiate Registration" message on
the display when you plug it in, the "Register Phone" option is available in the "Add/Remove Phones"
menu.
To remove a U1100 or U1200 from the system you must deregister it from the U1000 base phone.
1. On your U1000 base, press the "​ M enu​ " softkey.
2. Using the directional pad, move the indicator to "​ A dd/Remove Phones​ . " Press the "​ S elect​ " softkey.
3. Select the "​ D eregister Phone​ " option and press the "​ S elect​ " softkey.
4. Select from the list the extension you wish to remove and press the "​ S elect​ " softkey. Confirm by pressing
the "​ Y es​ " softkey.
Note: Removing an extension from the system will leave it unable to make or receive calls until it is
re-registered to a U1000 base.
8