Tone/Pulse Dialing; Priority Line; Delay Ring - RCA U1000 Manual

1. Press the "​ M enu​ " softkey while in idle mode.
2. Using the directional pad, move the indicator to "​ L ine Settings​ . " Press the "​ S elect​ " softkey.
3. Move the indicator to "​ R ing Tone​ " and press the "​ S elect​ " softkey.
4. This menu will allow you to control the ring tones on each line and the intercom. Using the directional pad,
move the indicator to the phone line you wish to change the tone for. When selected, each line will play
sample of the ringtone.
5. Using the left and right arrows of the directional pad, select the desired ring tone. Press the "​ S ave​ " softkey
when you are finished.

Tone/Pulse Dialing

Telephone lines in some areas may still require pulse dialing.
1. Press the "​ M enu​ " softkey while in idle mode.
2. Using the directional pad, move the indicator to "​ L ine Settings​ . " Press the "​ S elect​ " softkey.
3. Move the indicator to "​ T one/Pulse Dial​ " and press the "​ S elect​ " softkey.
4. Select the line that requires pulse dialing and press the "​ S elect​ " softkey.
5. Using the left and right keys on the directional pad, choose either "​ T one​ " or "​ P ulse​ " and press the "​ S elect​ "
softkey.
NOTE: All lines are set to "Tone" by default.

Priority Line

The priority line has precedence over the other three lines and, if available, will be used automatically when
the handset is lifted or the speakerphone is used. If the priority line is in use, the next available line will be
selected.
1. Press the "​ M enu​ " softkey while in idle mode.
2. Using the directional pad, move the indicator to "​ L ine Settings​ . " Press the "​ S elect​ " softkey.
3. Move the indicator to "​ P riority Line​ " and press the "​ S elect​ " softkey.
4. Select which line you wish to be the Priority Line and press the "​ S elect​ " softkey.

Delay Ring

Use this setting to delay this phone's ringer. Other phones on the system will still ring immediately on
incoming calls.
1. Press the "​ M enu​ " softkey while in idle mode.
2. Using the directional pad, move the indicator to "​ P hone Settings​ . " Press the "​ S elect​ " softkey.
3. Move the indicator to "​ D elay Ring​ " and press the "​ S elect​ " softkey.
4. Using the up and down buttons on the directional pad, select how many rings this phone will remain silent
before ringing during an incoming call.
Phone ID
Phone ID is what you name your phone and how it will appear on the intercom lists of the other phones on
the system.
1. Press the "​ M enu​ " softkey while in idle mode.
2. Using the directional pad, move the indicator to "​ P hone Settings​ . " Press the "​ S elect​ " softkey.
3. Move the indicator to "​ E xtension Name​ " and press the "​ S elect​ " softkey.
10