Type Label - Webasto Thermo Pro 90 Installation Instructions Manual

Thermo Pro 90
FL vehicles:
The combustion heaters shall be put out of operation by at least the following
methods:
a ) Intentional manual switching off from the driver's cab;
b) Stopping of the vehicle engine; in this case the heater may be restarted
manually by the driver;
c) Start up of a feed pump on the motor vehicle for the dangerous goods
carried.
(Requirement from ECE-R 122, Annex 9, point 3.3.1).
Technical Information
4

Type label

The label referred to in Annex 7, paragraph 4, or a duplicate, must be posi-
tioned so that it can be easily read when the combustion heater is installed in
the vehicle.
(Requirement from ECE-R 122, point 5.3.2.4.).
The type label must be positioned in a location where it is protected from
damage.
The non-applicable years should be removed from the type label, retaining the
current year.
For an example, see also Fig. 16.
43