Chan Set (Digital Channel); Store Chan; Delete Chan; Ch Type - Alinco DJ-MD5 Operation Manuals

※Chan Set (Digital Channel)

1. Store Chan

When select to store a channel it will store the current main channel displaying on
the screen as a new channel in channel zone, the current channel will be overwritten
if channel number is duplicated, input the desired channel number, then press select
to enter next menu, input the channel name and then press

2. Delete Chan

Go to Delete channel, select delete when you want to delete the current main channel
displaying on screen.

3. CH Type

A-Analog : Set up to analog channel
D- Digital : Set up to digital channel
A+D TX A: Mixed analog, allow receive analog and digital signal, TX is analog.
D+A TX D: Mixed digital, allow receive analog and digital signal, TX is digital.

4. TX Power

Set up the TX power for current channel. There are 4 selections.
Small: 0.2W
Low: 1W
Middle: 2.5W
High: 5W

5. Band Width

Only narrow band 12.5KHz for digital channel.

6. RX Freq

Input the desired RX frequency by keypad, Press
Be noted that if auto repeater is set with a offset frequency, when changing RX
frequency the TX frequency will be changed by offset. If auto repeater with offset
frequency is set Off. RX and TX frequency are set independence.

7. TX Freq

Input the desired TX frequency by keypad, Press
(MENU) key to save.
(MENU) key to save the change.
(MENU) key to save the change.
23