32. Auto Repeater B
Turn on the Auto Repeater function, the TX frequency in VFO mode will be auto
increased or decreased frequency on the channel B base on the set up offset frequency.
Off: Turn off the function
Positive: TX frequency= RX frequency + Offset frequency.
Negative: TX frequency= RX frequency - Offset frequency.
33-36. Programmable key PF1, PF2
You also can program these keys for different functions by set manually in radio.
Press
(MENU) key, move cursor to Settings, then select Radio Set then choose
programble key that you want to program. After selecting the key a list of functions
are shown, select the function then press
37. SMS Form
There are 2 format types of a message. If the transmit radio is set as M-SMS/ H-SMS
that require receiver radio must set as correspond M-SMS/H-SMS to receive message.
(M-SMS is set as default setting)
M-SMS: Compatible to Motorola radio type.
H-SMS: Compatible to Hytera radio type.
38. Time Zone
Set up the time zone of your location.
39. Date Time
Time Check: Allows to set up the date and time manually. Use the
the current year. Move to the month by pushing the [PF1] key. Set the month, and use
the [PF1] key to move forward each step. Once done, click the Menu key to save the
date and time.
GPS Check: When GPS is positioning successfully, enter this menu, select GPS
check to calibrate date & time correction automatically.
9.5. Chan Set (Channel Setting)
The channel set menu will change accordingly to the channel types. When the channel
type is digital, it will automatically hide the analog menus.
Press
(MENU) key, move cursor to Settings then select Chan Set to enter chanel
setting list.
(MENU) key to confirm and exit.
22
/
key to set