26. DTMF Speed
Offers DTMF encode speed selectable for receiver decode speed is more suitable,
50~500ms are the options.
27. Radio
Turn On/Off the FM radio.
28. FM Radio Monitoring
Mon On: During FM radio is On, radio still allows to receive or transmit signal on the
channel.
Mon Off: During FM radio is Off, radio will not allow to receive and transmits signal
on the channel.
29. Man Down Alarm
ON: Turn on the man-down function the radio will start alarm if the radio is falling to
the ground or put the radio at the horizontal. Raise the radio to stop the alarm.
Off: Turn off man-down function
30. Start Pwd
On: Set up the password for start up. You need to input the password to power on the
radio.
Note. In Case you forgot the password. Using the PC software to read data and it is
able to check password on PC software interface.
Off: No password is required for the radio power on start up.
31. Auto Repeater A
Turn on the Auto Repeater function, the TX frequency in VFO mode will be
increased or decreased frequency on the channel A base on the set up offset frequency.
Off: Turn off the function
Positive: TX frequency= RX frequency + Offset frequency.
Negative: TX frequency= RX frequency - Offset frequency.
21