Alinco DJ-MD5 Operation Manuals page 8

Record switch
Record
SMS
Dial
GPS
Monitor
Main channel switch
Hot key 1~6
Work Alone
Nuisance Delete
Digital Monitor
Sub CH Switch
Priority Zone
Programming Scan
MIC Sound Quality
LastCall Reply
Channel Type Switch
Channel Ranging
Enable/disable the recording function when TX or RX a call
conversation
Start/stop recording as a recorder. When stop recording, the
radio will remind repeat or send the record
In digital mode, press to enter into message box, only private
call and group call can send and receive a message
Start the manually dial
Check the GPS position information
Monitor the weak signal in analog mode or the signal with
unmatched ID or color code in digital mode
Choose channel A or channel B as the main channel
Press the key to perform the programmed function in hot key
setup
Turn on/off the work alone function
During scanning, press the key to skip the unwanted channel
In DMR mode, press the key to turn on/off monitor a target
radio
Turn on/ off the sub channel
Switch to Priority Zone
Press the key to start the scan in VFO channel. The scan start
and frequency end frequency shall be programmed in PC
software.
In digital channel, switch the microphone tone to normal or
enhanced mode
In digital channel, press the key to access the last call and
press PTT to call back
Switch the channel type(Analog, Digital, Ana+Dgi, Dgi+Ana)
Channel Ranging
8