Dmr Mode; Chan Set (Analog Channel); New Channel; Delete Channel - Alinco DJ-MD5X Operation Manual

How it work.
When an incoming private calls/messages comes at the RX radio it will reject the calls, and
messages.
At the RX radio user able to press PTT to another monitor radio, after received a call at
monitor radio, then they press PTT to talk back (at monitor radio) at RX radio will receive
the call sin a specific time (normally within 10 secs after the call end) after this period of
time even try to press PTT at monitor radio but the RX radio will not receive the call.
When "Reject RX" is selected as on in RX radio or power off the RX radio and selected
"call conformation" in TX radio press the PTT in TX radio but radio will not transmit, the
RED LED flashes only one time then the call will end.

23. DMR Mode

Select Simplex or Repeater or Double Slot:

※Chan Set (Analog Channel)

When the channel type is analog, it will auto hide the digital menus, instead, the
channel set will show the analog menus.
The below listed menus are for analog channel only, other not listed menus are same
as the digital channel.

1.New channel

Refer to digital channel setting

2.Delete channel

Refer to digital channel setting

3. Channel type

Refer to digital channel setting

4.TCDT

Set up the CTCSS/DCS code for the TX.

5.RCDT

Set up the CTCSS/DCS code for the RX.
32