Moni (Remote Monitor); Get Gps ( Get Gps Information); Check; Kill - Alinco DJ-MD5 Operation Manuals

2. Moni (Remote Monitor)

Select Remote Monitor, the Remote Monitor feature allows a remote user to activate a
target radio's microphone and transmitter for a period of time. A call is silently set up
on the target radio, and its PTT is controlled remotely without any indications given to
the end user. The duration that the target radio transmits after receiving a Remote
Monitor command is set in the target radio through the PC software. When receiving
the Remote Monitor command, the target radio initiates a Private Call back to the
originator of the Remote Monitor command.

3. Get GPS ( Get GPS Information)

Go to private contact and enter to Get GPS, and it will send out a signal to the target
radio, which will start the GPS positioning and send a message of its GPS position to
the transmit radio.

4. Check

Select Check Radio, and it will send out a radio check to the target radio, which will
send back a message if it is available or not available to the transmit radio. With this
feature, you can determine if another radio is active and powered

5. Kill

Select Kill, and it will send out a kill signaling to the target radio which will be killed
(No display, no operation) when receiving the signaling and it will send back a kill
successful message to the transmit radio.

6. Wake

Select Wake, and it will send out a wake signaling to the killed radio and the target
radio will return to standby when it receives this signaling and send back a Wake
successful message to the transmit radio.
on.6ATURES
13