ADVANCED OPERATIONS ( [PF1] & [PF2] KEY )
The [PF1] and [PF2] keys are programmable by using programming software.
Monitor
Under the standby conditions, pressing and releasing the programmed key, it beeps and enters the
monitor state. While in Monitor, it ignores CTCSS / DCS decode and enables monitoring all incoming
signals. Press this key again, it beeps twice and exits the monitor state.
Momentary Monitor
Under the standby conditions, pressing and holding the programmed key, it beeps and enters the
monitor state. While in Monitor, it ignores CTCSS / DCS decode and enables monitoring all incoming
signals. Press this key again, it beeps twice and exits the monitor state.
Temporary Deletion of the Interfering Channel from scanning
This function can temporarily skip the interfering channel or occupied channel from scan list.
When scan stops on one channel, pressing the programmed key; it beeps and temporarily deletes
this channel from the scan list. If only one or two channels are in the scan list, this operation is not
available. Restart the transceiver to restore the temporarily deleted channels into the list again.
Squelch Levels Enquiry
Under the standby conditions, pressing and holding the programmed key, it will announce current
squelch level by voice.
15
Professional
FM Transceiver